胤旭機電網最新報道 >> Ortman液壓缸_美國品牌_型號KIT2011-3TH-A : 3TH系列氣缸可以預測工業對不斷增加的壓力等級,延長使用壽命和減少維護的氣缸的要求。3TH堅固的設計結合了我們獨家的Uni-Cartridge桿壓蓋,一個保持架的桿式密封管,可快速方便地更……
3TH系列氣缸可以預測工業對不斷增加的壓力等級,延長使用壽命和減少維護的氣缸的要求。3TH堅固的設計結合了我們獨家的Uni-Cartridge桿壓蓋,一個保持架的桿式密封管,可快速方便地更換,而不會拆卸缸體。Orbinox氣缸
3000 psi壓力額定值
5000 psi(無庫存)壓力額定值
1.50到20.00 Bore
設計符合NFPA標準
可用于多個結構
1. Piston Rods—5⁄ 8" thru 4" diameter are
medium carbon steel with 100,000 psiminimum yield. Piston rods over 4"diameter have yield strengths between50,000 and 90,000 psi.
Sizes 5⁄ 8" thru 31⁄ 2" diameter are induction case hardenedto 54 Rockwell C. All piston rods are hard-chrome plated and highly polished.
2. Rod Wiper—Polyurethane, double lip type wiper designed to protect the piston rod, bearing and rod seal, is standard for all rod sizes. Also, metallic scrapers and Viton wipers are available for all rod sizes.
3. Bolted Rod Gland Cartridges—Heavy wall, ductile iron bearing is accurately piloted in head to assure perfect alignment, designed to accept a variety of seal styles.
With certain exceptions, the cartridges can be removed without removing mounts or tie rod nuts.This eliminates the necessity of cylinder disassembly to replace the rod seals or rod bearing.
Bearings are held in place with bolted steel retainer plates.
Bearing used for a given rod size are interchangeable into any cylinder bore with the same rod diameter.
a. Rod Seal—Polyurethane compound, exible lip type rod seal has excellent abrasion resistance and is wear compensating. Inherent characteristics of the material and design assure leakproof performance and long life.
b. Rod Bearing—Ductile iron material insures low friction, high load capabilities and long life.
4. Ports—Large unrestricted ports permit maximum ow with minimum pressure drop. Heads may be rotated independently at 90° intervals for convenient port location. SAE straight thread ports are optional. Oversize ports, one size larger than standard, can be furnished on most bore sizes by welding a half-coup
咨詢與評論